The HYDROS 2mL/min Dosing Pump is a simple and affordable pump for automating the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the power of the dosing pump to any simple timer or aquarium controller (Control XP8 or HYDROS WiFi Power Strip) to completely automate the dosing process. Each pump is capable of dosing a single solution. A 120V timer or controller is required for automatic on/off operation, sold separately.

HYDROS Dosing Pump Features

• Quiet operation
• Will not back siphon
• 4 Rotors
• >2,000 hours pump life
• Accuracy of +/- 2%
• Easy to use with a digital timer
• Comes with a dosing pump and a 10mL plastic beaker

IMPORTANT: DO NOT power multiple units from a single outlet if you wish to control them separately.

Pump Specs

• Average Output:2mL/min
• Fluid Volume:>1.4mL/min
• Accuracy:+/-2%
• Power:AC 110V /10w

Does NOT require a HYDROS Control to operate

WARRANTY

CoralVue, Inc. and HYDROS hereby guarantee this product to be free from defects in material and workmanship for a period of:

• 1 Year

Warranty is activated on the date of purchase.

This Standard Limited Warranty applies and is limited as follows:

• To the product only as long as it remains in the possession of the original purchaser.
• To the product that has not been subject to accident, misuse or abuse.
• To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
• That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
• That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
• Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.